Smart Architecture of Espadana

This SAE-PE450F-XL device supports power and data transmission over Cat.5e/6 cables. All the 5 Ethernet ports are capable of connecting with 10/100Mps, 1-4 ports can support IEEE 802.3af/at power supply for every POE standard devices. Regards to using advanced auto-sensing algorithm the SAE-PE450F-XL gives power only to IEEE802.3af front-end devices, so don't worry about connecting PoE or non-PoE devices to this feeder. Additionally, this good gives up the power when PoE devices are disconnected. Intelligently, this manageable PoE Switch SAE-PE450F-XL can recognized automatically PoE demands of devices, speed, duplex, and cable type using Auto Uplink™. This multi-function device can be altered to long transmission distance mode, enable/disable VLAN.SAE-PE450F-XL made by high quality of components were rigorous screened, have superior performance in stability, environmental adaptability. The product planned in a way of better resistance and ability to corrosion and electromagnetic interference. Power input also made a suitable and reliable types of power, to get more powerful suitability to environment.

Wireless AP and IP Camera’s required power can be supplied via CAT 5e/6 cable
5 x 10/100 Mbps RJ45 Ports with auto-sensing capability (1-4 Ports are meeting IEE802.3af/at Standard and are supporting POE)
Switch functionality for Long transmission up to 250 meter and physical isolated ports as VLAN ports
IEEE802.3 10Base-T and IEEE802.3u 100Base-TX were met
Flow Control Method: Full duplex based on IEEE802.3x, Half duplex based on Back Pressure
Port auto-flip (Auto MDI/ MDIX) is supported
Level 2 anti-thunder function for Uplink port (port 5)
Total Supported PoE Power: 65W (Port 1 - 4)
Line-speed switching (Frame size at the ranges of 64-1536) is supported in all ports.
No-noise design. This Mini Size Device Could be installed on desk or wall.

Performance (Switching capacity and forwarding rate)
MTBF	100000H
Address Database Size	1K
Packet Buffer Memory	768K
Network Latency (100 to 100M bps)	maximum delay less than 20 microseconds
Bandwidth	1.6 Gbps
Interface
Ports	5 x 10/100M RJ45 POE ports
Protocol
Protocol Store-And-Forward
Standards
IEEE 802.3at
IEEE 802.3x Flow Control
IEEE 802.3af DTE Power via MDIIEEE802.3z
IEEE 802.3u 100BASETX
IEEE 802.3i 10BASET
power
Cable length detection	250m
Power input	DC 52V 1.25A
Environmental Aspects
Working Environment	Operating Temperature: -20 ° ~ 55 ° C Storage Temperature: -40 ° ~ 75 ° C Operating Humidity: 10% ~ 90%, non-condensing
Dimensions	118x85x25mm