This SAE-FXS/FXO30P-R/T E1 is 1U, which supplies 30 line telephone output, Equipment electrical part for the whole digital circuits, machine reliability, stability, low power consumption, high integration, easy installation and maintenance. Many customers are telecommunications operators E1 leased lines used in computer networking, this equipment Can monitor the remote alarm status
30Line telephone tip-ring channel & de-multiplexer receiver on E1
supports FXO and FXS port with phone line, 2/4 wire audio interface
Max Power consumption: 10W
optional SNMP supported
| Product | |
|---|---|
| 30*Ports(FXO/FXS/ 2/4wire Voice)E1 Mux | |
| Product Model | |
| SAE-FXS/FXO30 P-R/T E1 | |
| E1 specification | |
| Packet Forwarding Rate | n*64Kbps±50ppm |
| E1 Impedance | 75Ω (unbalance) |
| Allowed debilitation | 120Ω (balance) |
| FXS Phone specification | |
| Voltage of Ring | 0 to 6 dBm |
| Frequency of Ring | 75V |
| Total amount of resistance for 2 line | 25Hz |
| Return loss | 600 Ohm (pick up) |
| FXO Switch specification/ EM 2/4 Line | |
| Voltage of Ring | 40 dB |
| Frequency of Ring | 35V |
| Total amount of resistance for 2 line in FXO switch & EM 2/4 Line | 17Hz-60Hz |
| Return loss | 600 Ohm (pick up) |
| Power | |
| Multifold power mode options | 40 dB |
| Power supply | AC220V |
| Max Power consumption | DC-48V / DC-24V |
| Short circuit current wave | AC180V ~ 260V;DC –48V;DC +24V |
| standards | |
| Support protocol G.703 for E1 | 10W |
| Support protocol G.742 and G.823 for Jitter tolerance | 8/20μs |
| Support Telephone interface with power protection | open-peak output voltage 6KV standards |
| Environmental Aspects | |
| power reached IEC61000-4-5 protocol | |
| Working Temperature : -10~60℃ | |
| Dimension | |
| Working Humidity: 5%~95%(non-condensing) | |
All rights company Smart Architecture of Espadana Reserved.