This SAE-360P4GE16E1-Rack is 6U high and 19 inch length, which supplies 360 line telephone output, 2*expansion interface(RS232/RS485/RS422 asynchronous data(optional), 4Channel 10/100/1000M Ethernet interface and 16E1 interface, Support protocol G.703 for E1.4Channel G-Ethernet interface is switch interface, can support VLAN. two fiber interface with 1+1 backup function, SNMP network management, Ethernet interface can exchange for each other, and VLAN division. The application is very flexible. Telephone interface on the back of equipment, for the convenience of users, there are two kinds of interface can be selected, DB37 and RJ45.
| Product name: SAE-360P4GE16E1-Rack | |
|---|---|
| Interface | |
| 360*Ports phone | 4Channel 10/100/1000M Ethernet interface Wire speed (1000M) and 4 expansion interface |
| 16 E1 | |
| standards | |
| Support protocol G.703 for E1 | Support protocol G.742 and G.823 for Jitter tolerance |
| Support Telephone interface with power protection | |
| E1 specification | |
| power reached IEC61000-4-5 protocol | E1 Impedance: 75Ω (unbalance) |
| Packet Forwarding Rate: n*64Kbps±50ppm; | 120Ω (balance); |
| G-Ethernet interface(10/100/1000M) | |
| Allowed debilitation: 0 to 6dBm | Jitter tolerance: In accord with protocol G.742 and G.823 |
| Interface rate:10/100/1000 Mbps | Interface Standard: Compatible with IEEE 802.3 |
| FXS Phone specification | |
| half/full duplex auto-negotiation | IEEE 802.1Q (VLAN) |
| MAC Address Capability: 4096 | Connector: RJ45 |
| FXO Switch specification | |
| Voltage of Ring: 75V | support Auto-MDIX |
| Total amount of resistance for 2 line: 600 Ohm (pick up) | Frequency of Ring: 25Hz |
| EM 2/4 Line | |
| Voltage of Ring: 35V | Return loss: 40 dB |
| Total amount of resistance for 2 line in FXO switch & EM 2/4 Line: 600 Ohm (pick up) | Frequency of Ring: 17Hz-60Hz |
| Power | |
| AD: 0dB | Return loss: 40dB |
| Two/Four-line Impedance: 600 Ohm | DA: -3.5dB |
All rights company Smart Architecture of Espadana Reserved.
