SAE-1P4bK This is 4 dry cotact-Relay with 1 phone port on one core fiber optic. 4 channel is trigger Data of our products and 4 relay which controls (open and close) circuits electromechanically. The main operation of this relay is to make or break contact with the help of a signal without any human involvement in order to switch it ON or OFF. It is mainly used to control a high powered circuit using a low power signal. SAE-1P4bK provides 1 channel RJ11 phone line on fiber optic as well as de-multiplex them in the best situation of tip-ring signal in the destination. This device use advanced analog and digital technologies for pursuing high performance bidirectional data transmission over fiber optic. The transceiver can send signals more than 20 kilometers on fiber(optionally).
| Data Characteristics | |
|---|---|
| Relay A | industrial equipment |
| Type of data: | Keyboard |
| Interface supporting terminal | Bi-directional |
| Controlling Equipment | RJ11 |
| Direction | 40 dB |
| FXS/FXO Phone specification | |
| Interface | 600 Ohm (pick up) |
| Return loss | 25Hz/ 17Hz-60Hz |
| Voltage of Ring | 1310 |
| Frequency of Ring | 1550(nm) |
| Total amount of resistance | 75V /35V |
| Link Budget (Single mode transmitters) | |
| Wavelength | 20(km) /40(km) /60(km) /100(km) |
| Maximum Transmission Distance | 0.5(dBm/km) /0.5(dBm/km)/ 0.25(dBm/km) /0.25(dBm/km) |
| lose | 9/125 um- 9/125 um- 9/125 um- 9/125 um |
| Fiber type | 1310(nm) |
| Link Budget (multi mode transmitters) | |
| Wavelength | 850 |
| Maximum Transmission Distance | 500(meter) |
| Fiber type | 62.5 um |
| lose | 1(dB m/km) |
All rights company Smart Architecture of Espadana Reserved.
