This SAE-PE890-FDGM management PoE switch prepare a field that power and data can feed from a single point, using Power over Ethernet (PoE) over a single cable. One 8-fast Ethernet ports and one 2-gigabit Combo sfp+RJ45 uplink ports prepare any 1000 Mbps link and the rest of 8 ports can supply industry-standard IEEE 802.3af power for every POE standard devices. Regards to using advanced auto-sensing algorithm the SAE-PE890-FDGM gives power only to IEEE802.3af front-end devices, so don't worry about connecting PoE or non-PoE devices to this feeder. Additionally, this good gives up the power when PoE devices are disconnected. Intelligently, this manageable PoE Switch SAE-PE890-FDGM can recognized automatically PoE demands of devices, speed, duplex, and cable type using Auto Uplink™. Remarkably, it has two gigabit fiber ports (SFPs) that helps smart CCTV network designers to improve their planning and use the switch intelligently. Additionally, network planners would control the network parameters via web management system. SAE-PE890-FDGM made by high quality of components were rigorous screened, have superior performance in stability, environmental adaptability. The product planned in a way of better resistance and ability to corrosion and electromagnetic interference. Power input also made a suitable and reliable types of power, to get more powerful suitability to environment.
Environmental Aspects | |
---|---|
Dimensions | 270*181*44.5mm |
Working Environment | Operating Temperature: 0 ° ~ 55 ° C Storage Temperature: -20 ° ~ 75 ° C Operating Humidity: 10% ~ 95%, non-condensing |
power | |
Cable length detection | 100m |
Power input | AC100-240V 50/60Hz (every country use a custom power plug) |
Performance (Switching capacity and forwarding rate) | |
Address Database Size | 1000 |
Packet Buffer Memory | 6M |
Forwarding Rate | 14.88Mpps |
Network Latency (100 to 100M bps) | maximum delay less than 20 microseconds |
Bandwidth | 192Gbps (non-blocking) |
MTBF | 190000 hours (about 21 years) |
Interface | |
Ports | 8-Port 10/100/1000M Base-T + 2x Gigabit SFP slots + 1x Console |
Protocol | |
Store-And-Forward | |
Standards | |
IEEE 802.3x Flow Control | |
IEEE 802.3u 100BASETX | |
IEEE 802.3i 10BASET |
file | description | model | image |
---|---|---|---|
download | This SAE-PE8900-FDG unmanaged PoE switch prepare a field that power and data can feed from a single point, using Power over Ethernet (PoE) over a single cable. 8 PoE Gigabit Ethernet ports and 2-gigabit combo(SFP+RJ45) uplink ports prepare any 1000Mbps link and the rest of 8 ports can supply industry-standard IEEE 802.3af power for every PoE standard devices. Regards to using advanced auto-sensing algorithm the SAE-PE8900-FDG gives power only to IEEE802.3af front-end devices, so don't worry about connecting PoE or non-PoE devices to this feeder. Additionally, this good gives up the power when PoE devices are disconnected. Intelligently, this unmanaged PoE Switch SAE-PE8900-FDG can recognized automatically PoE demands of devices, speed, duplex, and cable type using Auto Uplink™. Remarkably it has two gigabit fiber ports (SFPs) that helps smart CCTV network designers to improve their planning and use the switch intelligently. SAE-PE8900-FDG made by high quality of components were rigorous screened, have superior performance in stability, environmental adaptability. The product planned in a way of better resistance and ability to corrosion and electromagnetic interference. Power input also made a suitable and reliable types of power, to get more powerful suitability to environment. |
SAE-PE8900-FDG | ![]() |
All rights company Smart Architecture of Espadana Reserved.